Rule LoPro Automatic Bilge Pump 900 GPH (3407 LPH) 12V

Description

The Rule LoPro LP900S is a 12V automatic bilge pump rated at 900 GPH (3407 LPH), specifically engineered for shallow bilges and tight installation areas. Its low-profile design allows mounting in confined compartments where traditional bilge pumps may not fit.

The LP900S offers multiple operational modes to suit different onboard requirements. It can be configured to activate automatically at either 2″ (5 cm) or 1.3″ (3.25 cm) water level, depending on installation preference. An additional automatic timed mode checks for water by briefly activating the pump every 2.5 minutes. A fail-safe back-up feature protects against continuous run conditions.

The pump includes a fully rotating discharge body for flexible hose routing and is supplied with multiple discharge port options to accommodate various plumbing configurations. It can be mounted horizontally or vertically to adapt to bilge layout. A built-in Thermal Cut-Off (TCO) protects both pump and vessel, while marine-grade blocked wiring, ignition protection, and CE and ISO 8849 certification ensure compliance with marine safety standards.

Designed for quiet operation with minimal vibration, the LoPro series provides efficient bilge water removal while maintaining reliable performance in demanding marine environments.

Technical Specifications

• Flow Rate: 900 GPH (3407 LPH)

• Voltage: 12V DC

• Operation: Automatic (multi-mode)

• Activation Levels: 2″ (5 cm) or 1.3″ (3.25 cm) selectable

• Automatic Timed Mode: 2.5-minute check cycle

• Built-in Thermal Cut-Off (TCO)

• Ignition protected

• Horizontal or vertical mounting

• Technical Drawing

Application

• Shallow bilge compartments

• Tight installation spaces

• Petrol and diesel engine compartments (ignition protected)