Description
Clamcleat Vertical Nylon Cleat CL201 – Black (6–12mm Rope)
The Clamcleat Vertical Nylon Cleat CL201 provides a simple and effective way to secure ropes without the need for knots or complicated locking mechanisms.
Designed for ropes between 6mm and 12mm in diameter, its toothed channel allows the rope to drop into position for a firm grip. When adjustment is required, the rope can be lifted clear of the teeth for quick release.
Manufactured from UV-resistant nylon, this cleat is designed for outdoor use and provides a practical solution for securing and adjusting ropes on boats.
Key Features
-
6–12mm rope compatibility: Suitable for a range of medium-diameter marine ropes.
-
Positive rope locking: Toothed design grips the rope when seated in the cleat.
-
Quick release: Allows easy adjustment without untying knots.
-
UV-resistant nylon: Suitable for outdoor and marine environments.
-
Vertical design: Provides a practical rope-locking arrangement for suitable mounting positions.
-
Lightweight construction: Weighs just 43g.
-
Simple installation: Two mounting holes with 72mm centres.
-
Cost-effective solution: Straightforward design with no moving parts.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Clamcleat |
| Model | Vertical Nylon Cleat |
| Material | UV-resistant nylon |
| Colour | Black |
| Rope diameter | 6–12mm |
| Length | 95mm |
| Width | 28mm |
| Height | 35mm |
| Mounting hole centres | 72mm |
| Bolt size | M6 |
| Screw size | 6.3mm |
| Weight | 43g |
Typical Applications
The Clamcleat Vertical Nylon Cleat CL201 is suitable for:
-
Securing adjustable ropes on boats
-
General rope tensioning applications
-
Small boat and dinghy equipment
-
Flagpole rope control
-
Outdoor equipment requiring adjustable rope tension
Its straightforward design makes it particularly useful where ropes need to be secured and released regularly.
Simple Rope Locking and Release
The Clamcleat uses a toothed gripping channel rather than a conventional horn cleat.
To secure the rope, pull it into the teeth until it grips. When adjustment is needed, lift the rope out of the channel.
This allows quick changes to rope tension without repeatedly tying and untying knots.
Installation and Maintenance
Install the cleat securely using suitable M6 bolts or 6.3mm screws, depending on the mounting surface.
Position the cleat so the rope enters the gripping channel correctly and can be released without obstruction.
Rinse occasionally with fresh water to remove salt and dirt, and inspect the teeth and mounting points for signs of wear.







Reviews
There are no reviews yet.