Seajet Triple Pack combines a specialist propeller primer and self-polishing antifouling coating in one convenient kit. Designed for propellers, stern gear and trim tabs, it helps prevent marine growth on underwater metal components.

Suitable for both sailing yachts and motorboats, the system provides protection for one boating season when correctly prepared and applied with two coats of antifouling.

Key Features

• Complete primer and antifouling system in one pack.

• Self-polishing antifouling helps reduce marine growth.

• Suitable for aluminium, bronze and stainless steel.

• Designed for propellers, stern gear and trim tabs.

• Suitable for boats operating at speeds up to 40 knots.

• One-season protection with two antifouling coats.

• Suitable for saltwater, freshwater and brackish water.

• Available in three colours to match different stern gear finishes.

What’s Included?

The Seajet Triple Pack combines two specialist coatings:

Seajet 114 Propeller Primer

A thin-film epoxy primer designed to promote adhesion to metal surfaces, including aluminium, aluminium alloys and bronze. Suitable for underwater components such as propellers, stern gear and trim tabs.

Seajet 034 Emperor A Antifouling

A high-performance, self-polishing antifouling coating designed to protect underwater surfaces against marine fouling, including slime and weed growth.

Application Guide

For best results, follow the manufacturer’s preparation and application instructions.

1. Remove existing contamination, grease and loose coatings.

2. Prepare the metal surface as specified in the product instructions.

3. Apply one thin coat of Seajet 114 Propeller Primer.

4. Apply two coats of Seajet 034 Emperor A Antifouling, observing the recommended overcoating intervals.

Correct surface preparation is particularly important on propellers and other underwater metal fittings to ensure good coating adhesion.

Technical Specifications

Suitable Applications

Ideal for maintaining underwater metal components on recreational sailing yachts and motorboats, including boats operating in coastal waters, marinas and estuaries.

Particularly useful for annual maintenance where propellers and stern gear are exposed to marine growth during the boating season.

Micron 350 is suitable for use on fibreglass, wood, steel and lead boats, and is compatible with standard surface preparation and priming systems. It is recommended for 2–3 coats, applied by brush, roller or spray.

Available in a wide range of colours and volume options, it lets you tailor the antifouling system to your vessel’s size and style.

Available Variants

Colours:

• Black

• Navy Blue

• Blue

• Green

• Sand White

• Red

Sizes:

• 750 ml

• 2.5 L

• 5 L

• 20 L

Key Features

• Self-polishing copolymer formula for extended protection

• Effective in salt, fresh and brackish waters

• Smooth, low-sheen finish reduces hull drag

• Suitable for fibreglass, wood, steel and lead hulls

• 2–3 coat recommendation for best performance

• Can be launched 18 h after application (typical)

Good mechanical strength for improved crack resistance. Good colour retention throughout the season

For use as an antifouling for boats of glass fibre, wood, plywood and steel. Do not use on aluminium or other light-alloy metals. Risk of corrosion in case of direct contact. Suitable for cruising speeds.

Size: 5 L

Colour: Black

International Micron Extra is a high-performance antifouling paint developed to protect underwater boat hulls against marine growth.

Its self-polishing technology gradually renews the coating surface during use, helping maintain antifouling effectiveness while reducing excessive paint build-up.

Formulated with International’s Biolux technology, Micron Extra provides controlled biocide release for protection in challenging fouling conditions.

Key Features

• Premium self-polishing antifouling

• Biolux technology for controlled biocide release

• Helps protect against algae, slime and marine fouling

• Up to two seasons of protection with the specified 3–4 coat system

• Helps reduce excessive paint build-up

• Suitable for compatible sailing yachts and motorboats

• Can be hauled and relaunched without repainting, subject to coating condition

• Red matt finish

Technical Specifications

The colour, capacity and technical characteristics are supported by International’s product documentation.

dove-medows.co.uk

+1

Surface Compatibility

Suitable for properly prepared and primed fibreglass, wood, steel and lead surfaces.

Not suitable for aluminium, light-alloy or zinc-coated surfaces.

Application Advice

Before applying Micron Extra:

• Remove marine growth, dirt and loose antifouling.

• Check compatibility with existing coatings.

• Apply a suitable primer or barrier coat where required.

• Ensure the hull is clean and dry.

• Apply the recommended number of coats according to the technical data sheet.

• Observe the specified drying, overcoating and launching intervals.

For multi-season protection, International specifies a 3–4 coat application system.

International Cruiser UNO EU is a polishing antifouling paint developed to provide seasonal protection against marine fouling.

Designed for sailing yachts and motorboats operating at speeds up to 25 knots, it offers a practical one-coat application system for use in all but the most demanding fouling conditions.

Its polishing action gradually wears away the coating surface during use, helping maintain antifouling performance and reduce paint build-up.

Key Features

• One-coat antifouling system for seasonal protection

• Polishing (ablative) antifouling technology

• Helps protect against algae, slime and marine growth

• Suitable for sailing yachts and motorboats up to 25 knots

• Designed for use in seawater, freshwater and brackish water

• Suitable for properly prepared fibreglass, wood, steel, iron and lead

• Matt finish

• Application by brush or roller

Technical Specifications

These specifications are supported by International’s Cruiser UNO EU technical data sheet.

integration-gfm.irpcommerce.com

Surface Compatibility

Suitable for correctly prepared and primed:

• Fibreglass (GRP)

• Wood

• Steel and iron

• Lead

Not suitable for aluminium, light-alloy or zinc-coated surfaces.

Application Advice

For best results:

• Remove marine growth, dirt and loose existing antifouling.

• Check compatibility with previous coatings.

• Apply International Primocon where required for incompatible or unknown antifouling.

• Stir the paint thoroughly before use.

• Apply the specified coating thickness using a brush or roller.

• Observe the manufacturer’s drying and launching intervals.

Thinning is not recommended. International Thinner No. 3 is specified for cleaning application equipment.