Micron 350 is suitable for use on fibreglass, wood, steel and lead boats, and is compatible with standard surface preparation and priming systems. It is recommended for 2–3 coats, applied by brush, roller or spray.

Available in a wide range of colours and volume options, it lets you tailor the antifouling system to your vessel’s size and style.

Available Variants

Colours:

• Black

• Navy Blue

• Blue

• Green

• Sand White

• Red

Sizes:

• 750 ml

• 2.5 L

• 5 L

• 20 L

Key Features

• Self-polishing copolymer formula for extended protection

• Effective in salt, fresh and brackish waters

• Smooth, low-sheen finish reduces hull drag

• Suitable for fibreglass, wood, steel and lead hulls

• 2–3 coat recommendation for best performance

• Can be launched 18 h after application (typical)

Suitable for use on fibreglass, steel, aluminium, and plywood, Interprotect creates an effective moisture barrier while offering strong adhesion and corrosion resistance. It is ideal for new builds, refits, and preventative maintenance where long-term hull protection is required.

Available in grey or white, and supplied in 750 ml or 2.5 L sizes, the alternating colours help achieve accurate film thickness when applying multiple coats, ensuring optimal performance.

Formulated for use below the waterline, Gelshield 200 creates a durable, moisture-resistant barrier that helps prevent water ingress into the laminate. It can be applied as part of a full osmosis protection system or used during refit and maintenance to seal and protect hull surfaces.

Suitable for use on fibreglass hulls, Gelshield 200 is fast curing and easy to apply by brush or roller, allowing multiple coats to be applied in a single day under suitable conditions.

Available in green or grey to assist with coat visibility during application, and in 750 ml or 2.5 L sizes for both small repairs and full hull treatments.

Available Variants

Colours:

• Green

• Grey

Sizes:

• 750 ml

• 2.5 L

It cures quickly, is easy to mix and apply, and can be sanded to a smooth finish, making it ideal for filling cracks, dents, gouges and surface imperfections. Watertite bonds exceptionally well to fibreglass, wood, steel, aluminium and previously epoxy-coated surfaces, providing a strong, waterproof repair.  The formulation does not shrink and is extremely water resistant, making it suitable for osmosis damage repairs.

Suitable for use on hulls, keels, decks and structural components, International Watertite is a trusted solution for both professional boatyards and DIY maintenance.

Available in 125 ml for small repairs and 1 L for larger restoration projects.

Available Variants

• 125 ml

• 1 L

Suitable for a wide range of substrates including fibreglass, wood, aluminium, lead, cast iron and steel, One UP is easy to apply by brush or roller and sands smoothly between coats. Its formulation helps reduce the overall preparation time and improves the appearance of the topcoat once applied.

This primer is ideal for owners undertaking topside painting projects with one-pack finishes and for ensuring a well-prepared base that enhances overall coating performance.

Available Variants

• 750 ml — perfect for smaller topside areas or touch-ups

• 2.5 L — ideal for full topside repainting

It is commonly used when switching between different types of antifouling paints, helping to prevent adverse reactions and ensuring a reliable base for subsequent coats. Primocon also acts as a protective primer on bare substrates.

Suitable for use on fibreglass, wood, steel, lead and aluminium, International Primocon can be applied above and below the waterline and is compatible with most antifouling systems once fully cured.  Suitable for aluminium propellers.

Available in 750 ml, 2.5 L, and 5 L sizes, it is ideal for both small touch-ups and full hull preparation projects.

Available Variants

• 750 ml

• 2.5 L

• 5 L

Providing a smooth satin finish, Goldspar Satin reduces glare while highlighting the natural grain of the timber. It is ideal for interior joinery, furniture, bulkheads, and trim where a refined, low-sheen appearance is preferred.

Formulated for durability in the marine environment, it offers good resistance to wear and general cabin conditions, but is not intended for exterior use or direct UV exposure.

Designed for use above the waterline, Schooner enhances the natural beauty of timber while protecting against UV exposure, salt, and weathering. Its flexible formulation allows it to move with the wood, reducing the risk of cracking and peeling over time.

Supplied in a 750 ml tin, International Schooner is ideal for varnishing brightwork such as handrails, coamings, spars, and trim where a classic, high-gloss finish is desired.

Formulated to penetrate deeply into the timber, Woodskin helps protect against moisture ingress, UV damage, and weathering while maintaining a natural wood appearance. Unlike traditional varnishes, it does not crack or peel, making maintenance simple — additional coats can be applied without sanding back to bare wood.

Supplied in a 750 ml or 2.5 L sizes, International Woodskin is suitable for use on exterior wood such as toe rails, trim, and other non-walking surfaces above the waterline.

Formulated with fine non-slip aggregates, Interdeck provides reliable grip while remaining comfortable underfoot. It is easy to apply by brush or roller and offers good resistance to wear, weathering, and marine exposure.

Available in white or grey, and supplied in 750 ml size, International Interdeck is suitable for use on fibreglass, wood, steel, and aluminium surfaces that have been properly prepared.