The Meganex battery operated transfer pump is a practical solution for safely transferring liquids without manual siphoning. Compact and portable, it is ideal for marine maintenance, refuelling small tanks, or workshop use.

Suitable For

• Diesel
• Gasoline
• Engine oil
• Antifreeze
• Water
• Non-corrosive liquids

Features

• Battery operated portable pump
• Requires 4 x AA batteries (not included)
• Approximate flow rate: up to 10 litres per minute
• Lightweight and easy to store onboard
• Helps minimise spills and mess during transfer
• Simple one-hand operation

Ideal Marine Uses

Useful for transferring fuel to outboards, tenders, generators or auxiliary tanks, especially where larger pumps are impractical.

Important

Not suitable for corrosive chemicals or solvents.

The Whale AK0553 Service Kit is designed for servicing Whale Gusher Galley MK3 manual pumps commonly used in marine freshwater systems. Replacing worn diaphragms, valves, and internal components helps maintain efficient water flow and reliable manual operation onboard.

This genuine Whale service kit is ideal for preventive maintenance or restoring older pumps exposed to constant marine use and saltwater environments.

Compatible With

• Whale Gusher Galley MK3 manual pumps

Typical Applications

• Galley freshwater systems
• Hand-operated freshwater pumps
• Sailboats
• Motorboats
• Small cruising and fishing vessels

Benefits

• Restores smooth pump action
• Helps maintain consistent water flow
• Extends pump service life
• Reduces maintenance costs
• Genuine Whale replacement parts for proper compatibility

Recommended Maintenance

Manual freshwater pumps are regularly exposed to salt air, moisture, and continuous mechanical use. Periodic servicing helps prevent reduced pumping efficiency and unexpected failures during cruising or extended onboard stays.

The Whale AK8050 Service Kit is designed specifically for maintaining Whale MK5 single acting manual bilge pumps. Regular servicing helps restore pumping efficiency, improve reliability, and extend the operational life of your bilge system.

This original Whale maintenance kit is ideal for boats operating in saltwater conditions where pump diaphragms and valves are exposed to continuous wear and corrosion.

Compatible With

• Whale MK5 Single Acting Bilge Pumps

Ideal For

• Sailboats
• Motorboats
• Fishing vessels
• Commercial and recreational marine use

Benefits

• Restores pump efficiency
• Helps prevent loss of suction
• Extends pump lifespan
• Reduces the need for complete pump replacement
• Genuine Whale replacement parts for proper fit and performance

Recommended Maintenance

Bilge pumps should be inspected regularly, especially before long passages or the start of the boating season. Replacing worn diaphragms and internal components helps ensure dependable emergency bilge pumping when needed most.

The Nuova Rade Lalizas Major Service Kit is designed for full maintenance of LT-0 and LT-1 manual marine toilets. Regular servicing helps prevent leaks, stiff pumping, backflow issues, and loss of flushing efficiency — especially in demanding saltwater environments.

This kit is ideal for seasonal maintenance or restoring older toilets to proper working condition without replacing the complete unit.

Compatible With

• Nuova Rade LT-0 manual marine toilets
• Nuova Rade LT-1 manual marine toilets
• Lalizas marine toilet systems using LT-series pump assemblies

Typical Applications

• Sailboats
• Motorboats
• Fishing boats
• Coastal and Mediterranean recreational vessels

Benefits

• Restores smooth pump operation
• Helps prevent leaks and odors
• Extends toilet service life
• Reduces maintenance costs compared to full replacement
• Suitable for regular preventive maintenance

Recommended Maintenance

Marine toilet seals and valves are exposed to salt, scale buildup, and continuous moisture. Replacing worn components periodically helps maintain hygiene and reliable flushing performance onboard.

The Lalizas Nuova Rade Anti-Vent Loop Connection is an essential component for marine toilet systems installed below the waterline. It helps prevent siphoning and unwanted seawater inflow into the vessel interior, improving onboard safety and system reliability.

Manufactured from durable ABS plastic, this anti-vent loop connection is designed for marine environments where resistance to moisture and corrosion is important.

Available Variants

• 19mm diameter
• 38mm diameter

Key Features

• Designed for marine toilet systems
• Prevents water backflow and siphoning
• Suitable for installations below the waterline
• Durable ABS construction
• Corrosion-resistant material
• Easy integration into existing hose systems

Suitable Applications

Ideal for:

• Marine toilets
• Waste water systems
• Below-waterline plumbing installations
• Sailboats and motorboats

Non-return drain valve kit designed for marine drainage systems. It allows water to exit the boat while preventing seawater from flowing back inside.
Ideal for use in cockpit drainage, lockers, and other hull drainage points where backflow prevention is required. Built from durable marine-grade
plastic for long-lasting performance in harsh saltwater inviroments.

Faetures

• Non-return (one way) drainage system
• Prevents water backflow into the boat
• Marine rade UV-resistant plastic
• Corrosion-resistant construction
• Reliable sealing flap system
• Designed for easy installation and maintenance

Manufactured from Marelon, Forespar’s advanced glass-reinforced polymer, this valve provides excellent resistance to corrosion, electrolysis, and harsh marine environments. Unlike metal fittings, Marelon components will not corrode or seize, making them particularly suitable for long-term installation in sanitation systems.

The valve operates through a simple manual lever that clearly indicates the selected flow direction, allowing quick and secure switching between discharge routes. It is commonly used in combination with marine toilets such as Jabsco manual and electric toilet systems, where a Y valve is required to comply with different waste management setups.

Available in two sizes to suit standard marine sanitation hose diameters, the Marelon Y valve is widely used in both sailboats and motorboats due to its durability, smooth operation, and dependable sealing performance.

Variants

• 1″

• 1-1/2″

]]> https://www.ayamarnautico.com/product/3-way-valve-25mm/feed/ 0 https://www.ayamarnautico.com/product/automatic-float-switch/ https://www.ayamarnautico.com/product/automatic-float-switch/#respond Mon, 02 Mar 2026 17:10:43 +0000 https://www.ayamarnautico.com/?post_type=product&p=6360 Automatic bilge pump float switch with mercury-free micro switch for 12V and 24V DC marine systems.

With a flow rate of 750 gallons per hour, this pump is suitable for small to medium-sized vessels requiring dependable automatic operation. The unit includes a snap-off strainer base for quick inspection and cleaning, as well as an anti-fouling impeller designed to reduce debris build-up and maintain consistent performance.

The pump is engineered so that straight motor oil entering the bilge will not trigger activation, helping prevent unnecessary operation in oily conditions. Supplied with 18 AWG, 1 metre leads for installation in 12V or 24V DC systems (model dependent).

Designed specifically for marine environments, it provides efficient, automatic bilge protection with minimal wiring complexity.

Technical Specifications

• Flow Rate: 750 GPH

• Voltage Options: 12V or 24V DC

• Outlet Diameter: 3/4″ (19 mm)

• Wiring: 18 AWG

• Lead Length: 1 m

• Operation: Automatic with built-in float switch

• Installation: Submersible

• Warranty: 2 Years

Application

• Marine bilge water removal

• Small to medium recreational boats

• Automatic bilge protection systems

]]> https://www.ayamarnautico.com/product/seaflo-750-gph-automatic-bilge-pump-12v-24v/feed/ 0 https://www.ayamarnautico.com/product/seaflo-1100-gph-automatic-bilge-pump-12v-24v/ https://www.ayamarnautico.com/product/seaflo-1100-gph-automatic-bilge-pump-12v-24v/#respond Mon, 23 Feb 2026 12:51:06 +0000 https://www.ayamarnautico.com/?post_type=product&p=6256 Automatic 1100 GPH bilge pump with integrated float switch. Available in 12V or 24V with 1-1/8" (29mm) discharge outlet.