Anchoring – Ayamar Nautico

Ultra Marine Anchor Stainless Steel

Lorie — Sat, 07 Feb 2026 11:27:27 +0000

The Ultra Marine Anchor is a stainless steel anchor engineered with a strong focus on weight distribution, setting behaviour, and controlled recovery. Its design allows the anchor to naturally orient itself into the correct attack position during deployment, supporting consistent penetration of the seabed.
Key design features include a curved, lead-filled tip to promote immediate penetration, a hollow shank to optimise weight distribution, and a concave base surface designed to maximise holding power. Large side wing plates help maintain anchor stability during changes in wind or tide, reducing the likelihood of release once set.
For recovery, the anchor incorporates a flat pivot surface on the underside, assisting controlled breakout from the seabed. Designed to sit securely on standard bow rollers, the Ultra Marine Anchor is suitable for a wide range of vessel types, from recreational craft to larger yachts. Manufactured from stainless steel, it offers durability and resistance in the marine environment.

Available weight variants:

5 kg
8 kg
12 kg
16 kg
21 kg
27 kg
35 kg
45 kg

Larger sizes are available to order.

Ultra Marine Ultra Flip Swivel

Lorie — Sat, 07 Feb 2026 10:38:48 +0000

The Ultra Marine Ultra Flip Swivel is an anchor connector designed to assist with the correct alignment of the anchor as it is retrieved into the bow roller. Unlike standard swivels that only allow rotation, the Ultra Flip Swivel features a guided geometry intended to help prevent the anchor from approaching the bow roller in an incorrect orientation, reducing the risk of jamming and manual correction at the bow.
Manufactured from polished 316L stainless steel, the swivel is designed for durability and resistance in the marine environment. Its compact construction allows compatibility with a wide range of anchor types and bow roller configurations. The unit is intended for daily anchoring use and requires no maintenance beyond rinsing with fresh water after exposure to salt.
The Ultra Flip Swivel is supplied in multiple sizes to match different chain diameters, ensuring proper integration within the anchoring system.

Available variants (by chain diameter):

6 mm
8 mm
10 mm
13 mm

Larger sizes are available to order.

Lalizas Sea Anchor (Drogue)

Lorie — Fri, 06 Feb 2026 17:25:17 +0000

The Lalizas Sea Anchor (Drogue) is designed to reduce vessel speed, slow drift, stabilise the hull, and minimise swing frequency when deployed in the water. By increasing hydrodynamic resistance, it helps reduce the water drift effect on the hull, improving control and comfort in a variety of sea conditions.

Suitable for powerboats, sailing boats, inflatable boats, jet skis, and kayaks, the drogue can be used as a sea brake or sea anchor, making it particularly useful during fishing, waiting offshore, or controlling drift. Constructed from strong PVC-coated fabric with continuous internal webbing, it is designed for durability and repeated use in the marine environment.

The sea anchor features a weighted bottom and automatic opening, allowing easy deployment and stable operation without tangling or spinning. Its portable, compact design allows it to dry quickly and be stored efficiently when not in use. Supplied complete with a harness buoy and available in five sizes to suit different vessel lengths.

Available variants:

Size 1 – up to 4.5 m (15 ft)
Size 2 – up to 6 m (20 ft)
Size 3 – up to 7.5 m (25 ft)
Size 4 – up to 9 m (30 ft)
Size 5 – up to 13.5 m (45 ft)

Genovese Galvanized Uncalibrated Anchor Chain

Lorie — Wed, 12 Mar 2025 11:46:53 +0000

This Genovese Galvanized Uncalibrated Anchor Chain by Lalizas is a reliable and durable choice for a wide range of anchoring setups. Manufactured according to DIN 5685A, it features a robust welded construction and a strong hot-dip galvanised finish that provides long-lasting protection against corrosion in marine environments.

Designed for general-purpose anchoring, moorings, and onboard applications that do not require calibrated chain, this chain is ideal for use with many manual and electric windlasses that accept uncalibrated formats—or as a dependable link in mooring lines, chain-rope combinations, and auxiliary anchoring systems.

Available in 7 mm and 10 mm diameters and sold by the metre, allowing you to purchase exactly the length you need for your boat.

Features:

Hot-dip galvanized steel for enhanced corrosion resistance
Manufactured to DIN 5685A standard
Strong welded links for secure anchoring
Suitable for anchoring, mooring, and general onboard use
Ideal where calibrated chain is not required
Sold by the metre for custom lengths
Available in 7 mm and 10 mm diameters

Notes:

Not suitable for windlasses requiring calibrated chain
Always check anchor and windlass specifications before purchasing

Stainless Steel 316 Calibrated Anchor Chain

Lorie — Wed, 12 Mar 2025 11:30:39 +0000

This Stainless Steel 316 Calibrated Anchor Chain from Lalizas is engineered for reliability, strength, and long-term durability in demanding marine environments. Made from marine-grade AISI 316 stainless steel, it offers exceptional resistance to corrosion, saltwater exposure, and mechanical wear.

Precision-manufactured to ISO 4565 / DIN 766 standards, this chain is fully calibrated, guaranteeing compatibility with most windlasses designed for these chain specifications. Whether used for primary anchoring systems, mooring setups, or as part of a rope-chain combination, it delivers smooth windlass operation and dependable holding performance.

Sold by the metre and available in 4 mm and 6 mm diameters, it allows you to customise your chain length to suit your vessel’s needs.

Features:

Constructed from high-quality AISI 316 stainless steel
Superior corrosion resistance ideal for saltwater conditions
Calibrated chain manufactured to ISO 4565 / DIN 766
Compatible with windlasses requiring calibrated chain
Smooth operation and consistent link dimensions
Strong welded links for secure anchoring
Available in 4 mm and 6 mm diameters
Sold by the metre

Notes:

Always check windlass calibration requirements before purchase
316 stainless steel provides higher corrosion resistance than 304 or galvanized chains

Lofrans Calibrated Anchor Chain Galvanized

Lorie — Mon, 03 Mar 2025 11:55:27 +0000

Lofrans Hot-Dipped Galvanized G40 Anchor Chain, Calibrated.

This chain made of steel grade 40 exhibits higher tensile strength and it is hot dip galvanized for enhanced corrosion resistance. They are produced following the strictest procedures and comply with international standards and class societies and regulations. The chain has an authenticity check “LFR” engraved link located every 30 cm.

Steel Grade 40
Hot Dip Galvanized
Extended quality testing
Certificate of Analysis for every drum included
Lofrans’ Authenticity Check -“LFR”

For 10mm chain, check the length of the internal chain link “B” in the diagram. DIN 766 is 28mm and ISO 4565 is 30mm.

Available in ISO 4565 and DIN 766 in various lengths and diameters. If you don´t see the length you need in the available options, please contact us. Larger diameter 12mm to 16mm chain available to order.

Bow Roller Stainless Steel 304

Lorie — Tue, 25 Feb 2025 16:13:44 +0000

The Lalizas Bow Roller Stainless Steel 304 is designed to provide smooth, reliable guidance for your anchor during lowering and retrieval. Constructed from durable AISI 304 stainless steel, it offers excellent corrosion resistance and long-term strength, making it suitable for most recreational boats operating in coastal and inshore waters.

Its carefully shaped cheeks and roller allow the anchor to deploy cleanly and return securely without damaging the bow or pulpit. This bow roller helps protect your hull and anchoring gear while ensuring easier, safer anchor handling from the foredeck.

Compatible with a wide range of anchor types, it is an excellent upgrade for improving anchor management and deck organization.

Features:

High-quality 304 stainless steel construction
Corrosion-resistant and suitable for marine environments
Smooth roller for easy anchor deployment and retrieval
Helps protect hull, bow, and anchor gear
Sturdy mounting base for secure installation
Compatible with many common anchor designs

Ideal for: Small to medium motorboats and sailing yachts looking for dependable bow hardware.

Dimensions: 165 (L) x 50 (W) x 64mm (Ø)

Anchor Chain Markers

Lorie — Fri, 27 Dec 2024 09:55:39 +0000

These anchor chain markers provide a simple and effective way to identify the amount of anchor chain deployed, improving control and safety when anchoring. By fitting securely into the links of the chain, they offer a clear visual reference that can be seen both on deck and at the windlass. No tools needed.

Designed for use with common anchor chain diameters, the markers are available in multiple colours, allowing boat owners to create a personalised colour-coding system. Suitable for both calibrated and uncalibrated chain, they are ideal for leisure craft and professional vessels alike.

An essential anchoring accessory that helps prevent overpaying or underpaying chain.

Sizes available: 6mm (pack of 14) | 8mm (pack of 10) | 10mm (pack of 8) | 12mm (pack of 8)

Colours available: Blue | Red | Yellow | Green | White

Mooring Device with Chain Brake – Stainless Steel

Lorie — Thu, 05 Dec 2024 16:16:41 +0000

The mooring device with chain brake is designed to securely lock the anchor chain while reducing dynamic loads transmitted to the windlass and deck structure. By acting as a mechanical chain stopper, it improves anchoring safety and helps protect both the anchor system and the vessel during mooring. Manufactured from marine-grade stainless steel, it offers excellent resistance to corrosion and reliable performance in demanding marine environments. This device is suitable for use with standard anchor chains and is available in two size ranges to match different chain diameters, ensuring correct fit and effective load distribution when installed correctly.

Sizes available: 6 – 8 mm | 10 – 12 mm

Chain to Rope Joiner

Lorie — Wed, 04 Dec 2024 17:54:03 +0000

Chain to Rope Joiner Stainless Steel 316

Sizes available: 6 – 8 mm | 8 – 10 mm | 10 – 12 mm