When applied in four roller coats, Seajet 117 offers effective protection against osmosis, making it an ideal choice for new builds, refits and preventative maintenance. It forms a strong, moisture-resistant barrier and is suitable for use beneath antifouling paints as well as two-component topcoats.

This epoxy primer is particularly well suited as a first coat on GRP, delivering excellent adhesion and a stable base for subsequent coatings. Seajet 117 can be used both above and below the waterline, with colour options tailored to each application.

• Silver Grey is recommended for below-waterline use

• Off White is recommended for above-waterline areas

Available Variants

Colours:

• Silver Grey

• Off White

Sizes:

• 1 L

• 2.5 L

• 5 L

• 20 L

Technical Data Sheets:

• English
• Español
• Français
• Deutsch

Formulated using a special acrylic resin, Seajet 015 acts as an effective sealer and barrier coat, making it ideal for use over unknown, incompatible or Teflon-based antifouling systems. It helps ensure reliable adhesion when switching antifouling types or brands, reducing the risk of paint failure.

The primer offers good resistance to seawater and creates a stable, uniform surface for the application of antifouling paints. Its quick-drying properties allow for efficient overcoating, making it well suited to both professional yards and DIY boat maintenance.

Seajet 015 is supplied in silver grey, providing clear visual coverage and easy inspection before antifouling application.

Available Variants

Colour:

• Silver grey

Sizes:

• 0.75 L

• 2.5 L

• 5 L

• 20 L

Technical Datasheets:

• English
• Español
• Deutsch

It is designed to improve paint flow and ease of application when brushing, rolling or spraying, helping to achieve a smooth, even finish. Seajet Thinner A is also suitable for cleaning brushes, rollers and spray equipment immediately after use.

This thinner should be used only where specified in the product’s technical data and added gradually to avoid over-thinning, ensuring optimal coating performance.

Available Variants

Sizes:

• 1 L

• 5 L

Technical Datasheets:

• English
• Español
• Portugues
• Français
• Deutsch

Designed to deliver reliable one-season protection, Seajet 032 offers controlled polishing action to maintain effectiveness while minimising paint build-up. Its formulation is compatible with almost all existing antifouling systems, making it a practical choice for commercial yards, maintenance programmes and refits.  Suitable for speeds up to 40 knots.

Suitable for use on fibreglass, steel and wooden hulls, Seajet 032 Professional must not be used on aluminium substrates due to its copper content. Application is straightforward by brush or roller and is optimised for efficient coverage on larger hull areas.

Available in professional pack sizes, Seajet 032 is ideal where cost control and dependable seasonal protection are the priority.

Available Variants

Colours:

• Black

• Red

• Blue

Sizes:

• 5 L

• 20 L

Its controlled polishing action provides consistent fouling protection while helping to reduce paint build-up over time. Seajet 031 is well suited to cruising yachts and motorboats operating in salt, fresh and brackish waters, where reliable performance is required without the cost of premium antifouling systems.  Suitable for speeds up to 40 knots.

Easy to apply by brush or roller, Seajet 031 Samurai is compatible with many existing antifouling coatings when properly prepared. It is an ideal option for boat owners seeking effective, straightforward antifouling at a competitive price point.

Available in a wide range of colours and pack sizes, Seajet 031 Samurai can be matched to boats of all sizes.

Available Variants

Colours:

• Black

• Blue

• Red

• Shark Grey

Sizes:

• 0.75 L

• 2.5 L

• 5 L

• 20 L

Technical Datasheets:

• English
• Español
• Portugues
• Français
• Deutsch

Its advanced self-polishing technology ensures a controlled release of active ingredients, maintaining a smooth hull surface while reducing paint build-up over time. Being copper-free, Seajet 038 eliminates the risk of galvanic corrosion, making it an ideal choice for aluminium hulls, outdrives and stern gear, as well as fibreglass, steel and wooden boats.  Suitable for speeds up to 40 knots.

Suitable for use in salt, fresh and brackish waters, Seajet 038 Taisho offers reliable season-long protection and is easy to apply by brush or roller. It is particularly well suited to environmentally sensitive areas where copper-based antifoulings may be restricted.

Available in a selection of colours and pack sizes to suit boats of all sizes.

Available Variants

Colours:

• Black

• White

• Navy

Sizes:

• 0.75 L

• 2.5 L

• 5 L

• 20 L

Technical Datasheets:

• English
• Español
• Portugues
• Français
• Deutsch

The hard matrix provides excellent resistance to abrasion, making Seajet 037 particularly suitable for boats that are frequently lifted, trailered or cleaned. Unlike polishing antifoulings, it maintains its film thickness, allowing the hull to be scrubbed without excessive paint loss.  Seajet 037 Coastal is a hard antifouling for boats with speeds up to 70 knots.

Seajet 037 Coastal is suitable for use in salt, fresh and brackish waters and can be applied by brush or roller. When properly prepared, it is compatible with many existing hard antifouling systems and is a practical choice for annual maintenance.

Available in a full range of popular colours and multiple pack sizes, Seajet 037 Coastal can be matched easily to boats of different sizes and usage patterns.

Available Variants

Colours:

• Black

• Navy

• Mid Blue

• Red

• Dark Grey

Sizes:

• 0.75 L

• 2.5 L

• 5 L

• 20 L

Technical Datasheets:

• English
• Español
• Portugues
• Français
• Deutsch

Designed for blue water cruising and long-term protection, it delivers controlled polishing action to maintain a smooth hull surface while continuously releasing active ingredients for reliable fouling control. This makes Seajet 039 particularly well suited to boats operating year-round in warm or heavily fouled waters.  Suitable for speeds up to 40 knots.

Seajet 039 Platinum is suitable for use in salt water and can be applied to fibreglass, polyester, steel and wooden hulls when correctly prepared. Its durable two-component system offers extended service life compared to conventional antifouling paints, making it an excellent choice for demanding cruising conditions.

Available Variants

Colours:

• Black

• Navy Blue

• Mid Blue

Sizes:

• 2 L

• 4 L

Technical Datasheets:

• English
• Español
• Portugues
• Français
• Deutsch

Its slow-polishing action ensures a steady release of biocides, helping prevent excessive paint build-up and reducing drag over time. This makes Seajet 033 well suited to cruising sailing yachts and motorboats operating in salt, fresh and brackish waters.  Suitable for speeds up to 40 knots.

Seajet 033 can be applied by brush or roller and is compatible with many existing antifouling systems when correctly prepared. The controlled polishing rate makes it a practical choice for annual maintenance without the aggressive wear associated with faster self-polishing coatings.  It is suitable for Fiberglass, Wood, Steel and Polyester surfaces.

Available in a range of popular colours and multiple pack sizes, Seajet 033 Shogun can be matched to boats of varying sizes and usage patterns.

Available Variants

Colours:

• Black

• Navy Blue

• Mid Blue

• Red

• Dark Grey

Sizes:

• 0.75 L

• 2.5 L

• 5 L

• 20 L

Technical Datasheets:

• English
• Español
• Portugues
• Français
• Deutsch

Its controlled self-polishing action helps prevent the build-up of fouling organisms while reducing paint accumulation over time, contributing to consistent performance and reduced drag. Seajet 034 is suitable for use in salt, fresh and brackish waters and is ideal for cruising yachts and motorboats.  Suitable for speeds up to 40 knots.

The paint is easy to apply by brush or roller and is compatible with commonly used antifouling systems when correctly prepared. It offers reliable protection throughout the season and is well suited to both annual maintenance and full hull treatments.  It is suitable for Aluminium, Fiberglass, Wood, Steel and Polyester surfaces.

Available in a range of popular colours and multiple pack sizes, Seajet 034 Emperor can be tailored to boats of all sizes.

Available Variants

Colours:

• Black

• Navy Blue

• Mid Blue

• Bright Red

• White

Sizes:

• 0.75 L

• 2.5 L

• 5 L

• 20 L

Technical Datasheets:

• English
• Español
• Portugues
• Deutsch