NEW SOLUTIONS FOR OLD CHALLENGES: Breaking from the Rocna design, the Vulcan features a unique and patented shank and fluke geometry – including the innovative roll-palm (A) at the rear of the fluke – which self-rights the anchor on the seabed without the use of a roll-bar. This is assisted by the V-bulb (B) which extends fluke ballast downward to gain maximum leverage and efficiency. This development permits a larger fluke surface area than competing designs which rely on simple dead weight, while the concave fluke (C) is similar in design to the Rocna.

FIT FOR ALL VESSELS – AND THEIR OPERATORS: No roll-bar and a carefully designed shank profile (D) ensures a snug fit on the bows of a widely expanded range of vessels. Platforms, bowsprits, prods, stays, and other protrusions are cleared with less inconvenience.

PRECISION SETTING: The Rocna roll-bar (A) ensures the anchor always arrives at the ideal angle for penetration, and the skids (B) guide the fluke tip (D) which chisels into the seabed. An instant reliable set is secured with every use.

ROCK SOLID HOLDING POWER: A concave fluke (C) gives the greatest resistance. In soft seabeds, this provides the secure holding power you need. On hard or weedy sea floors, Rocna’s chisel tip (D) cuts through and bites deep.

HIGH TENSILE STEEL SHANK (E): Rocna anchors are designed – and built – for strength and durability.

RESISTANT TO WIND AND TIDE SHIFTS: All Rocna anchors remain stable and buried, and fight roll-out on veering of pull, or if dragged beyond holding ability, providing enhanced security whatever the circumstance.

MAXIMUM VERSATILITY: Rocna anchors are true multi-purpose anchors that set and hold in most seabeds, from soft mud to hard sand, clay, grass, and kelp.

SELF-DEPLOYING AND SELF-RECOVERING: The Rocna shank is designed so the anchor self-launches and self-stows on the majority of bow-rollers, with the greatest possible reliability.

 

NEW SOLUTIONS FOR OLD CHALLENGES: Breaking from the Rocna design, the Vulcan features a unique and patented shank and fluke geometry – including the innovative roll-palm (A) at the rear of the fluke – which self-rights the anchor on the seabed without the use of a roll-bar. This is assisted by the V-bulb (B) which extends fluke ballast downward to gain maximum leverage and efficiency. This development permits a larger fluke surface area than competing designs which rely on simple dead weight, while the concave fluke (C) is similar in design to the Rocna.

FIT FOR ALL VESSELS – AND THEIR OPERATORS: No roll-bar and a carefully designed shank profile (D) ensures a snug fit on the bows of a widely expanded range of vessels. Platforms, bowsprits, prods, stays, and other protrusions are cleared with less inconvenience.

PRECISION SETTING: The Rocna roll-bar (A) ensures the anchor always arrives at the ideal angle for penetration, and the skids (B) guide the fluke tip (D) which chisels into the seabed. An instant reliable set is secured with every use.

ROCK SOLID HOLDING POWER: A concave fluke (C) gives the greatest resistance. In soft seabeds, this provides the secure holding power you need. On hard or weedy sea floors, Rocna’s chisel tip (D) cuts through and bites deep.

HIGH TENSILE STEEL SHANK (E): Rocna anchors are designed – and built – for strength and durability.

RESISTANT TO WIND AND TIDE SHIFTS: All Rocna anchors remain stable and buried, and fight roll-out on veering of pull, or if dragged beyond holding ability, providing enhanced security whatever the circumstance.

MAXIMUM VERSATILITY: Rocna anchors are true multi-purpose anchors that set and hold in most seabeds, from soft mud to hard sand, clay, grass, and kelp.

SELF-DEPLOYING AND SELF-RECOVERING: The Rocna shank is designed so the anchor self-launches and self-stows on the majority of bow-rollers, with the greatest possible reliability.