Nuova Rade – Ayamar Nautico

Boat Hook Tip

Lorie — Tue, 10 Mar 2026 16:08:33 +0000

Nuova Rade Boat Hook Tip

This hook features a female plastic body with two ends. It is designed for strength and reliability in marine environments.

Size: 25mm

Material: Plastic

Colour: Black

Nuova Rade Fuel Hose with Primer Bulb 2m

Lorie — Fri, 06 Mar 2026 16:15:10 +0000

The Lalizas Nuova Rade Fuel Hose with Primer Bulb is a complete fuel line assembly designed for supplying fuel from a portable tank to outboard engines. The hose is manufactured from PVC fibre reinforced material, providing durability, flexibility, and resistance to the marine environment.

Each assembly includes 2 metres of Ø8mm fuel hose fitted with a manual primer bulb that allows the fuel system to be quickly primed before starting the engine. This helps ensure consistent fuel flow and easier engine starting, especially after the system has been idle.

The primer bulb is available in two sizes to suit different engine fuel requirements. Both versions provide efficient manual priming and reliable fuel transfer for small to medium outboard engines.

Suitable for use on a wide range of outboard-powered boats, including small motorboats, RIBs, inflatables, and tenders, this fuel hose assembly provides a practical and dependable fuel supply solution.

Variants

Medium Bulb (Ø39mm)
Large Bulb (Ø45mm)

Nuova Rade Solar Powered Marine Light

Lorie — Thu, 05 Mar 2026 17:31:15 +0000

The Nuova Rade Solar Powered Marine Light is a practical and energy-efficient lighting solution designed for small boats, tenders, and deck use. Powered by a high-capacity solar panel and an integrated 800mAh rechargeable battery, the light provides more than 10 hours of operation after a full charge, ensuring reliable illumination through the night.

Three powerful LEDs produce an all-around luminosity of approximately 1.2 candela, allowing the light to function as an anchor indication light for small vessels or as general deck illumination. The light is designed with a detachable body that can be removed from its base, making it convenient for winter storage or portable use onboard for activities such as reading or dining in the cockpit.

Built with IP65 protection, the unit is resistant to water spray and marine environments. It can also be combined with Nuova Rade antenna rail mounts, allowing secure installation on rails or other mounting points. Designed in Italy, this light offers a simple, cable-free lighting solution ideal for boats where easy installation and low power consumption are priorities.

Nuova Rade Shower Head Short ABS 1/2″

Lorie — Tue, 17 Feb 2026 12:58:38 +0000

The Nuova Rade Short ABS Shower Head is a compact and lightweight shower fitting designed for marine freshwater systems. Manufactured from durable ABS plastic, it offers corrosion resistance and reliable performance in onboard environments where moisture and salt exposure are common. The shower head features a standard 1/2″ threaded connection, ensuring compatibility with most marine shower hoses and plumbing systems. Its short-body design makes it suitable for confined installations such as cockpit showers, transom washdowns, and compact bathroom compartments. Available in two finish variants — white or chromed plastic — it allows visual matching with different onboard fittings while maintaining practical functionality.

Available Variants

White
Chromed Plastic

Thread Specification

1/2″ threaded connection

Nuova Rade Flexible Floating Bailer

Lorie — Tue, 17 Feb 2026 10:42:28 +0000

The Nuova Rade Flexible Floating Bailer is a practical manual water removal scoop designed for use on dinghies, tenders, kayaks and small boats. Manufactured from durable, flexible plastic, it allows efficient scooping and controlled discharge of water from the cockpit or hull interior. Its floating design helps prevent accidental loss overboard, while the ergonomic shape ensures comfortable handling during repeated use. Finished in petrol blue for high visibility onboard, this bailer is an essential safety accessory for small craft where manual water removal may be required.

Nuova Rade Polyamide Cleat

Lorie — Sat, 14 Feb 2026 12:15:49 +0000

The Nuova Rade Polyamide Cleat is a lightweight, corrosion-resistant deck cleat designed for small to medium-sized craft. Manufactured from high-strength UV-stabilised polyamide, it offers excellent durability in marine environments without the corrosion issues associated with metal fittings. Suitable for securing mooring lines, fenders, and dock lines, it provides reliable performance for tenders, RIBs, small motorboats, and sailboats. Available in black or white, and in six length variants (60mm, 80mm, 107.5mm, 142mm, 176mm, and 209mm), the cleat allows appropriate sizing according to line diameter and vessel requirements. Its moulded construction ensures smooth line contact surfaces while maintaining structural rigidity when correctly fastened to deck or gunwale surfaces.

Available Sizes

60 mm
80 mm
107.5 mm
142 mm
176 mm
209 mm

Available Colours

Black
White

Plastic Thru-Hull Skin Fitting Threaded White

Lorie — Fri, 06 Feb 2026 16:22:40 +0000

The Lalizas Nuova Rade Plastic Thru-Hull Skin Fitting Threaded White is designed for use in marine plumbing systems where reliable hull penetration is required. Manufactured from PA (polyamide), the fitting offers good resistance to the marine environment while maintaining a lightweight construction. The threaded design allows secure connection with compatible hoses and seacocks, making it suitable for drainage, intake, or discharge applications depending on installation requirements. Supplied in white, this thru-hull fitting is intended for use on recreational and small commercial vessels.

Available variants:

1/2″
3/4″
1″
1-1/4″
1-1/2″
2″

Product Code	Product Description	Colour	Size	Material	Flange Ø	Thread Ø	Length	Cut-Out
44737	Thru-Hull Fitting 1/2”, L.74mm, White	White	1/2” inch	PA	40 mm	15 mm	74 mm	66 mm
14186	Thru-Hull Fitting 3/4”, L.77mm, White	White	3/4” inch	PA	44 mm	19 mm	77 mm	70 mm
44740	Thru-Hull Fitting 3/4”, L.81mm, White	White	3/4” inch	PA	47 mm	16 mm	81 mm	75 mm
44743	Thru-Hull Fitting 1”, L.87mm, White	White	1” inch	PA	52 mm	23 mm	87 mm	80 mm
198218	Thru-Hull Fitting 1 1/4”, L.98mm, White	White	1 1/4” inch	PA	62 mm	30 mm	98 mm	90 mm
44746	Thru-Hull Fitting 1 1/2”, L.98mm, White	White	1 1/2” inch	PA	75 mm	36 mm	98 mm	90 mm
198221	Thru-Hull Fitting 2”, L.110mm, White	White	2” inch	PA	90 mm	45 mm	110 mm	100 mm

Nuova Rade Electric Double Action Air Pump

Lorie — Wed, 04 Feb 2026 12:56:41 +0000

The Lalizas Nuova Rade Electric Double Action Air Pump is a lightweight and easy-to-handle pump designed for the efficient inflation and deflation of inflatable products. Featuring a comfortable grip and quiet operation, it is suitable for use with inflatable boats, air mattresses, pool floats, and similar inflatables.
The pump supports both AC and DC power sources, operating on 100–240 V AC (50/60 Hz) or 12 V DC, offering flexibility for use at home or onboard. With an output of 400 litres per minute and a maximum pressure of 40 mbar (0.55 psi), it is designed for high-volume, low-pressure applications. The pump includes inflate and deflate functions, allowing fast setup and compact storage after use.

Lalizas Galley “Store-All” Case White

Lorie — Mon, 02 Feb 2026 17:49:00 +0000

The Lalizas Galley “Store-All” Case is a practical onboard storage solution designed to keep small everyday items neatly organised. Suitable for use in galleys, cockpits, and helm areas, it can hold sponges, brushes, sun-block, or other small objects that require easy access. The case is mounted using the Lalizas special support base for cases (Product Code 99824-7, not included), which allows installation on a wall, console, or rail depending on the vessel layout. Finished in white, it integrates cleanly with most marine interiors and helps maintain an orderly onboard environment.

Lalizas “Store-All” Drink Holder

Lorie — Mon, 02 Feb 2026 17:05:33 +0000

The Lalizas “Store-All” Drink Holder is a compact and convenient cockpit accessory designed to keep drinks upright and out of the way while onboard. Suitable for installation on any smooth surface, the holder can be mounted using the Lalizas support base (Product Code 99824-7, not included), which may be positioned on either the back or the bottom of the holder to suit the available space. Designed as part of the Lalizas Store-All system, it is ideal for use in cockpits, consoles, and helm areas. The holder is available in white and graphite and features an internal diameter of 90 mm at the lower section and 93 mm at the upper section, accommodating a wide range of beverage containers commonly used onboard.